| 薛文鹏，段小维，潘鹏飞.基于数据的发动机模型匹配方法研究[J].航空发动机,2017,43(5):97-102 |
| 基于数据的发动机模型匹配方法研究 |
| Research on Matching Method of Engine Model based on Test Data |
| |
| DOI： |
| 中文关键词: 模型匹配 部件特性 动态过程 航空发动机 |
| 英文关键词:model matching component characteristics transition state aeroengine |
| 基金项目: |
|
| 摘要点击次数: 2462 |
| 全文下载次数: 1540 |
| 中文摘要: |
| 针对在使用环境条件下发动机部件特性未知的问题，为获得在实际装机条件下的发动机部件特性，采用1 种基于参考
数据的发动机部件级模型匹配方法，在对测量数据和模型特征分析的基础上，选取适当调整参数，以模型在非设计点的仿真输出与
参考数据的匹配精度为目标，通过迭代方法求解部件特性。仿真数据表明：采用基于数据的发动机匹配技术得到的发动机模型，其
仿真输出与参考数据的偏差均在允许范围内。利用该方法可以得到在使用条件下的发动机部件特性，为装机状态发动机的仿真预
测提供技术支撑。 |
| 英文摘要: |
| In view of the problem of unknown components at service condition, an adapting method based on the rig data was proposed
to obtain the characteristics of the engine components under the actual condition. Adjustment parameters were selected based on the
analysis of model characteristics and test data. The error of model simulation and test data was selected as objective function and used in
iterative algorithm for component characteristics. The simulation results show that the error between the model simulation which derived
from the method and test data is within the maximum error. The components characteristics was obtained by using the engine matching
technology based on the test data, which provide support for engine simulation and prediction under the actual condition. |
| 查看全文 查看/发表评论 下载PDF阅读器 |