陈志英,郑家祥,李建福.航空发动机空气管路应力优化设计[J].航空发动机,2018,44(4):1-7 |
航空发动机空气管路应力优化设计 |
Optimization Design Method of Aero-Engine Air Duct System |
|
DOI: |
中文关键词: 空气管路系统 弹塑性 应力 优化设计 航空发动机 |
英文关键词:air duct system elastoplastic stress optimization design aeroengine |
基金项目: |
|
摘要点击次数: 1387 |
全文下载次数: 1104 |
中文摘要: |
针对航空发动机空气管路系统受载应力及应变过大的问题,对该系统进行3 维全尺寸弹塑性分析,讨论了载荷加载过
程对应力应变的影响;对应力较大部位采用结构分解方法建立优化模型,进行管路部件应力优化,获得三通结构尺寸优化结果;利
用参数灵敏度分析结果选择合适的设计变量,建立系统管线优化模型,补偿热- 位移载荷产生的附加应力。优化结果显示,最大总
应力降低5.49%,附加载荷应力降低12.28%。验证了方法的有效性。 |
英文摘要: |
Aimed at the large stress and strain of aeroengine air duct system, 3D elastoplastic analysis on the full scale of aeroengine
duct system was done. The influence of loading process on stress and strain was discussed. The optimization model of the duct parts with
large stress was built by structural decomposition method, and the tee branch structure size optimization results was obtained by optimize the
stress of duct parts. Proper design variables were chosen from the parameter sensitivity analysis results. The pipeline system optimization
model was established, and additional stress generated by thermal and displacement loads was compensated to a lower level. The
optimization result shows that: the maximum stress is decreased by 5.49%, and the additional stress is decreased by 12.28%. The validity of
the method is verified. |
查看全文 查看/发表评论 下载PDF阅读器 |