刘明1,常海涛2,段燕1,刘尚成2.DCC 在航空发动机工艺尺寸链计算中的应用[J].航空发动机,2020,46(4):98-102 |
DCC 在航空发动机工艺尺寸链计算中的应用 |
Application of DCC in Process Dimension Chain Calculation of Aeroengine |
|
DOI: |
中文关键词: 工艺尺寸链 形位公差 封闭环判断 计算机辅助公差分析 航空发动机 |
英文关键词:process dimension chain Geometric Tolerance close loop judgement CAT(Computer-Aided Tolerancing) aeroengine |
基金项目:航空动力基础研究项目资助 |
|
摘要点击次数: 1217 |
全文下载次数: 1134 |
中文摘要: |
在航空发动机零件加工过程中,为了减小由于加工、设计和测量基准不统一而导致的误差累积和加工工序中形位公差
的综合影响,从工艺尺寸链计算的难点闭环的判断和形位公差的处理分析入手,总结闭环判断的原则和判断技巧,应用尺寸链计算
(Dimensional Chain Calculation,DCC)对航空发动机输出轴零件的基准转换和形位公差进行分析。结果表明:DCC 软件相比传统的
手工计算,具有计算效率高和精确度高的优势;形位公差的处理结果更准确,解决了工艺复合的尺寸链计算问题。 |
英文摘要: |
In the process of aeroengine parts machining,in order to reduce the error accumulation and the comprehensive influence of
Geometric Tolerance in machining process caused by the inconsistency of machining,design and measurement,the principle and skill of
closed loop judgment were summarized from the judgment of closed loop and analysis of Geometric Tolerance in process dimension chain
calculation. The reference conversion and Geometric Tolerance of aeroengine output shaft parts were analyzed by Dimensional Chain
Calculation (DCC). The results show that compared with traditional manual calculation,DCC software has the advantages of high efficiency
and accuracy. The processing result of Geometric Tolerance is more accurate,which solves the problem of dimension chain calculation of
process composite. |
查看全文 查看/发表评论 下载PDF阅读器 |